[American Handbook of the Daguerrotype by Samuel D. Humphrey]@TWC D-Link book
American Handbook of the Daguerrotype

CHAPTER II
1/93

CHAPTER II.
Coloring Back Grounds--Transparent ditto--Gilding Dissolvent Solution for removing Specks--Solarized Impression--To Purify Water--Cleaning Mercury--Adhesive Paper--Black Stain for Apparatus--Sealing Wax for Bottles--Rouge--Rotten Stone--Potassa Solution--Hyposulphite Solution--Substitute for do .-- Gilding Solution--Solution for increasing the Brilliancy of the Daguerreotype--Bleaching Solution;--Cold Gilding--Neutralizing Agents--Buff Dryer--Keeping Buffs in order--Cleaning Buckskins--Reflector for taking Views.
To Color Back-grounds--To obtain a properly colored back ground is a matter of no little importance to the Daguerreotype operator.

I had nearly exhausted all patience, and tried the skill of painters to obtain a back-ground that would be suitable to my purpose; but all to no avail.

At last I adopted the following method, and at a cost of coloring of twenty-five cents, can now produce a back-ground far more valuable than those which had cost five dollars before.
Take common earth paint, such as is used in painting roofs; mix this with water to about the consistency of cream; then to four quarts of this mixture add about one pint of glue water (common glue dissolved in water, also about as thick as cream).

This last will cause the paint to adhere to the cloth, to which it is applied with a common white-wash brush.

By applying the brush on the coating while it is wet, it may be so blended that not a line can be seen, and a perfectly smooth color of any shade can be obtained.


<<Back  Index  Next>>

D-Link book Top

TWC mobile books